{"id":4157,"date":"2018-01-16T16:03:15","date_gmt":"2018-01-16T16:03:15","guid":{"rendered":"https:\/\/pjgcreations.co.uk\/?p=4157"},"modified":"2018-03-02T09:51:32","modified_gmt":"2018-03-02T09:51:32","slug":"using-raspberry-pi-azure-iot-hubs-node-js-initial-setup","status":"publish","type":"post","link":"https:\/\/www.pjgcreations.co.uk\/using-raspberry-pi-azure-iot-hubs-node-js-initial-setup\/","title":{"rendered":"Using the Raspberry Pi with Azure IoT Hubs and Node.js – Initial Setup"},"content":{"rendered":"
[vc_row][vc_column][vc_column_text]<\/p>\n
As part of my workshop on using the Raspberry Pi with Azure IoT Hubs using Node.js, we’ll spend some time getting your Raspberry Pi setup ready for the Workshop.<\/p>\n
There are several steps involved in this process and the whole process can take roughly an hour and a half… So go and grab a cup of tea and make yourself comfortable![\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][vc_column_text]<\/p>\n
The particular workshop concentrates mainly on a Raspberry Pi… So the parts you’ll need are;<\/p>\n
[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][vc_column_text]<\/p>\n
You’ll need a few bits of software to get your Pi upto speed and then to start developing with it;<\/p>\n
[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][vc_column_text]<\/p>\n
It’s worth mentioning again… This should work on all Pi’s from the Pi B+ onwards, however a Raspberry Pi Zero will obviously need some extra hardware in converters and pin headers.<\/p>\n
Assuming you’ve bought all of your bits and installed all of the above software then the first thing to do is connect your SD card to your PC;<\/p>\n
First, insert your MicroSD Card into an SD Adapter;<\/p>\n